EKA2-EU

Application

• TROX smoke control dampers of Type EKA2-EU, with CE marking and Declaration of Performance, for smoke extraction via mechanical smoke extract systems
• Provision of outdoor air supply for mechanical smoke extract systems
• Can be used with ventilation function if the mechanical smoke extract system is approved for ventilation by the building authorities
• Integration into the management and control equipment with TROXNETCOM

• Declaration of Performance according to Construction Products Regulation
• Complies with the European product standard DIN EN 12101-8
• Tested for fire resistance properties according to DIN 1366-10 and DIN EN 1366-2
• Hygiene requirements conform to VDI 6022 part 1, VDI 3803, DIN 1946 part 4 and DIN EN 13779
• Corrosion protection according to DIN EN 15650 in connection with DIN EN 60068-2-52
• Closed blade air leakage to DIN EN 1751, class 3
• Casing air leakage according to DIN EN 1751, class C
• Low differential pressure and sound power level
• Any airflow direction
• Integration into the management and control equipment with TROXNETCOM

• EI 90/120 (vew,how i<->o) S 1500 Cmod AA multi

• B × H: 200 × 200 – 1500 × 800 mm (in increments of 1 mm)
• L: 305 mm or 500 mm

• The damper casing, including all mechanical components, is made of lightweight steel or sheet steel.
• The damper blade is made of a special insulating material, optionally also available in an impregnated version.
• Depending on the ambient temperature, the closed damper blade is sealed with a hot seal or a cold seal to prevent the spread of heat and smoke.
• The design variants with powder-coated casings meet increased requirements for corrosion protection.

• Cover grille
• Cover grille without minimisation of free area
• Extension piece

• OPEN/CLOSE actuator, with 24 V AC/DC or 230 V AC supply voltage

Technical data

• Nominal sizes: 200 × 200 – 1500 × 800 mm
• Casing lengths: 305 and 500 mm
• Volume flow rate range: up to 12000 l/s or up to 43200 m³/h at 10 m/s
• Differential pressure range: pressure level 3: -1500 to 500 Pa
• Temperature range: at least -30 to 50 °C
• Upstream velocity: ≤ 15 m/s

• Duct smoke detector RM-O-3-D
• Duct smoke detector with airflow monitor RM-O-VS-D
• Smoke control damper EK-JZ
• Smoke control damper EK-EU TROX-TLT smoke exhaust fans from the X-FANS subassembly
• Smoke exhaust fan for roof installation BVDAX/BVD
• Smoke exhaust fan for wall installation BVW/BVWAXN
• Smoke exhaust centrifugal fan BVREH/BVRA
• Smoke exhaust jet fans BVGAX/BVGAXN

Standards and guidelines

• Complies with the European product standard DIN EN 12101-8 Smoke and heat control - Smoke control dampers 
• Is classified according to DIN EN 13501-4 Fire classification of construction products and building elements
• Fire protection tested in accordance with DIN EN 1366-2 and DIN 1366-10 Fire resistance tests for installations - smoke control dampers
• DIN EN 1751 Ventilation for buildings – Air terminal devices
• Hygienic requirements in accordance with VDI 6022 Sheet 1, VDI 3803, DIN 1946 Part 4 and DIN EN 13779
• Corrosion protection in accordance with DIN EN 15650 in conjunction with DIN EN 60068-2-52

Maintenance

• Smoke control dampers must be operational at all times and must be maintained regularly so that they meet the performance requirements.
• Maintenance at least once every six months; maintenance must be recorded; documents must be kept for reference.
• The owner of the smoke extract system must arrange for a functional check of the smoke control damper every six months. For this purposes, follow the basic maintenance specifications according to DIN EN 13306 in conjunction with DIN 31051. If two consecutive tests at intervals of 6 months do not reveal any functional defects, the smoke control damper only needs to be checked once a year.
• Depending on the installation location, country-specific regulations may apply.
• For details on maintenance and inspection, please refer to the installation and operating manual.